【US】4 Axis Nema23 Dual Shaft Stepper Motor 76mm 270Oz-in&Driver&Power supply Kit

Description

Good News:
This new items have arrived our US warehouse, welcome you to purchase.
We have
USA Warehouse
in United States,so
we will ship from USA local Warehouse
to
American customers directly.
Fast shipping and
fast delivery
and
free VAT
! Ship by
DHL/UPS!
Other countries still ship from China!
【USA Stock & Fast Shipping & Free VAT】
4 Axis Nema23 Dual Shaft 76mm Stepper Motor 270Oz-in 3A & TB6560 Driver Kit
Package Include:
4 x TB6560 MD430 single axis driver
4 x 23HS8430B stepper motor  (
Dual shaft
270 Oz-in 3.0A/76mm length)
1 x 350W 24V/10A switching power supply
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
English user manual for breakout board and stepper motor driver will send by email.
1. TB6560 MD430 Low noise of stepper motor driver
1. Introduction
MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%).
MD430-HZ
2. Features
1) Single-chip motor driver for sinusoidal microstep control of stepping motors
2) Power on in indication led
3) 3Amps-34Volts(Supply voltages:12-34DC)
4) Full step, half step, eight step and sixteenth step(selection with dipswitches)
5) Torque (100%, 75%,50%, 20%)
6) Work Current (0-3A selection with SW1/SW2/SW3)
7) 4 Wire,6 Wire,8 Wire stepper motors can be used
8) Two phases bipolar driver
9) Easy wiring with standard screw terminals
10) Step frequency up to 100khz
11) Fuse protection on power supply rail(protects the board,but also your power supply and motor)
3. Application fields
Suitable for all kinds of small and medium-sized automation equipment and apparatus For example, laser machines, laser engraving &cutting machine, laser subsurface engraving machine, laser handicraft cutting machine, (nonmetal materials) laser marking machine, laser seals engraving machine and photosensitive seal machine.
2. 5 axis CNC Breakout board interface adapter board
Description:
1, full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;
2, leads to all the parallel port of all 12 data transmission output pin, which can control the five stepper motor driver;
3, with 5-way input interface, you can access the limit switches and emergency stop switch, reset knife;5 input LED indicates the status of the input;
4, all the way with a 12A relay control, normally open, normally closed leads, user-friendly connection;
5, power supply with 5V USB power supply or external power supply to facilitate the access of external power supply;On the external drive enable signal amplification, filtering, enhancement processing;
6, the pulse, the direction of signal shaping, enhanced with a carrying capacity, data transmission speeds reach 10 MBit / S;
7, the output pin with extension interfaces can 2.54mm pin 2.54mmXH-Block;
Superiority:
1,the use of new imported Japanese Toshiba TB6560 chip (disguising);
2,The base used dense teeth radiator, cooling super, to ensure the stable operation of equipment;
3,the input signal using a high-speed opto-isolation to ensure not losing steps, which the pulse direction signals with the same level of 6N137, dual high-speed optocoupler;
4 a variety of semi-flow mode and the semi-flow current selection, the use of more flexible
5,Decay mode is adjustable to ensure the motor running smooth;
6.,Sophisticated appearance size cooling pad size: 75mm * 65mm, four mechanical installation positioning hole size is: 67mm * 58, mounting hole diameter is 4mm
7,Set method detailed table on the board, easy to use;
8,With anti-reverse circuit, even if not careful the power plug back and will not burn the chip, the use of safer.
3. Stepper Motor
General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature ----------—20deg ---- +50deg
Insulation resistance:100ohm Min,500VDC
Insultion Strength--------500VAC for one minute
Datasheet (23HS8430B,
front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)
Note:if you need single shaft pls contact us, we can produce.
Motor lead wires:
RED: A+
GREEN: A-
YELLOW: B+
BLUE: B-
4.Switching power supply
350W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:24v/14.5 A,single output switching power supply.
Shipping
Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediate
l
ly
We ship to
USA, United Kingdom, Canada, Australia, New Zealand, Belgium, Netherlands, Luxembourg, Italy, Germany, France, San Marino, Austria,
Denmark, Finland, Greece, Ireland,
Guernsey Island,
Jersey Island, Norway,
Portugal, Spain,
Sweden, Switzerland, Poland, Bulgaria, Slovenia, Slovakia,
Czech Republic,
Hungary,
Roumania, Lithuania, Hongkong,Taiwan, Janpa, Korea, Singapore, Tailand,
Malaysia, Philippines,
Indonesia
, if your country not in this range
please contact us before you bid to check detail and confirmed for the shipping cost!
Delievry time( Airmail Packets)
USA    round 7-10 business days
UK,Candana,Australia,New Zealand,Asia               15-25 business days
EU(Germany,France,Spain,etc)                                15-25 business days
South America,other countries                                  20-35 business days
DHL      5-8 business days
EMS      4-10 business days
When weight less than 2kgs, we usually ship by post air mail which will take round 10-15 business days.
some areas
may be later
due to variation of postal service in different areas
, if above 2kgs we can ship by DHL/UPS/EMS which need confirm by us
All items will be shipped within 1-3 business days upon receipt of payment
Payment
We accept paypal payment, all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery)
Payment must be made within 48hours of the auction end time
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
Problem&Feedback
Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it.
We are a new member in ebay now, and need understand both of sides
Pls email us before you want to leave any negative feedback
Refund
When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
Customer’s satisfaction is very important to us.