New Leadshine Easy Servo Drive ES-D508+ES-M32320 3 Phase NEMA23 Servo Motor Y

Description

template
New Leadshine Easy Servo Drive   ES-D508+ES-M32320 3-Phase NEMA23 Servo Motor
Y
Note: the package including  cable
Description(ES-D508):
1. ES-D508 is one of the models in leadshine  ES-D series easy servo drives which  can take 20-50VDC input voltage and  output 0.5-8.0A continuous load-based  current.It is capable of driving NEMA  17,23,24 and 34(1-2 stacks) easy servo  motora(stepper motors with encoders)  with the position loop closed in real time
2. Based on latest DSP technology and adopting  leadshine’s advanced control  algorithm,ES-D508 easy servo drive applies  servo control on easy servo  motors.When adopted with an easy servo motor,it  combines features of both open  loop stepper&brushless servo systems,and  offers many unique advances features  for excellent motion control system  performance
3. Same as servo drives in traditional  brushless servo systems,an ES-D508 easy  servo drive takes encoder feedback  from a driven ES-M series easy servo motor to  close the position loop and  eliminate the possibility of lose of movement  synchronization,Therefore,  loss of steps which limits adoption of stepper  systems is totally  eliminated in ES-D508 driven easy servo systems.compared with  constant  output current in open loop stepper drive,output current from an  ES-D508  servo drive to the driven motor is load based.When torque requirement is   low,the output current is automatically lowered to the level of “just   enough”.But when the torque requirement is high,an ES-D508 easy servo drive  can  boost the output current quickly,up to 8.0A.This can significantly  improve  control system response time,offer excellent acceleration  performance.and reduce  motor heating by as much as 50% over open-loop  stepper systems.Also,there is no  torque reservation needed for an ES-D508  driven easy servo system,In an ES-D508  driven easy servo system,it always  allows 100% torque implementation available  from the driven easy servo  motor and thus improves system high speed performance  by as much as 30%  over comparable open loop stepper systems.In  addition,smoothness and  quietness are also significantly improved in ES-D508  driven easy servo  systems over steppers
4. Compared with traditional brushless servo  systems,cost for ES-D508 driven  easy servo systems is significantly  lower.They also outperform comparable  traditional brushless servo systems  for features of much higher low-middle speed  torque,high standstill  stiffness,no hunting(shaking),no overshooting,and almost  zero setting  time.In addition,plug-and-play setup for almost all applications  makes  ES-D508 driven easy servo system much simple to set up,over   hard-to-configure brushless servo systems which usual involve configurations  of  tens of parameters
5. When an ES-D508 easy servo drive is  implemented with a leadshine ES-M series  easy servo motor,there is no  configuration needed for almost all  applications.The output resolution of  ES-D508 with the output resolution  defaulted to output resolution of 2,000  pulses per resolution(equal to 10  microstep in 2-phase stepper systems)
6. ES-D508 driven easy servo systems have been  widely adopted by many leadshine  OEM clients to upgrade their Open-loop  stepper systems or replace brushless  servo systems in industries such as  CNC  machinery,electronics,semiconductor,medical,textile,robotics,lab  automation
Feature(ES-D508):
1. Easy servo drive,max 50VDC input,0.5-8.0A load based output current
2. Step and derection control
3. Closed position loop for no loss of movement synchronization
4. Operating voltage:20-50VDC
5. Load based output current of 0.5-8.0A
6. High torque at starting and low speed
7. No torque reservation
8. High stiffness at standstill
9. Significantly reduced motor heating
10. Smooth motor movement and extra low motor noise
11. Quick response,no delay and zero setting time
12. No loss of steps;no hunting;no overshooting
13. Plug-and-play and no tuning
Description(ES-M32320):
1. ES-M32320 os 2.0N.m(283 oz-in) 3-phase NEMA 23 stepper motor with  integrated  1.000 line incremental encoder.It is built with high quality  material and can  move smoothly with high precision,very low noise & heating
2. When driven by leadshine ES-D508 easy servo drive,the position loop  between  the motor and drive is fully closed.Therefore,loss of steps which  limits  adoption of stepper systems is totally eliminated.Because there is  no torque  resolution needed like in open loop stepper systems,you can much  better  high-speed performance than open loop stepper systems by increasing  up to  30%.Such systems are also ideal to replace brushless servo systems to  offer huge  starting and low speed torques.you can get more information on  leadshine Easy  servo products page
3. Leadshine ES-M32320 easy servo motor can also be driven by regular open  loop  3-phase stepper drives,and output encoder signals to motion  controllers,or  external devices
Feature(ES-M32320):
1. 3-phase
2. NEMA 23 frame size
3. 2.0N.m(283 oz-in) holding torque
4. Speed range:0-3,000RPM
5. Integrated 1,000-line incremental encoder
6. Smooth movement
7. Low motor heating and noise
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
What in Package:
1 x Leadshine ES-D508 Easy servo  drive
1 x Leadshine ES-M32320 Easy servo motor
Contact Us:
1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback.
2. Please contact us by "Ask a question".
Payment
1. Payment methods accepted :
Paypal
only
.
2. Payment must be received within 7 business days of auction closing.
Shipping
1. We ship your orders within 1-2 business days after the payment received.
2. Item shipped via Singapore Post or HongKong Post , It takes about 7-14 business days (USA,CA,AU,UK).others country 10-20 business days(Brzil,India,RU),Exact delivery time depends on postal process.
3. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system , we will try our very best to resolve any problems with you
Return Policy
1. Return is accepted within 14 days after the buyer's receiving the item.
2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one.
3. Unused/unopened merchandise will be fully credited.
Other Policies
We are not responsible for any custom duty or import tax.
If you need we write low price on shipping bill, pls leave message when you make payment .
All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find .