INNO TS Plus Single & Ribbon Fiber Thermal Hot Jacket Stripper TS-PLUS

Description

Up for sale an INNO TS Plus thermal hot jacket stripper.
Comes with power cord, and case.
Model: TS Plus
It is new as shown in the picture!
Inno TS Plus Thermal Stripper
TS-Plus is developed as a dedicated stripper mainly for ribbon fiber cable with thermal heater. With its simple and fast operation, anyone can do clear stripping with near-zero failure. It is a very stable tool with lightweight material and compact design. With easy hand operation, it provides long lasting battery capacity: approx. 500 times of ribbon fiber cable stripping.
Features
Long-lasting Thermal Stripper for ribbon fiber cable Dedicated stripper for ribbon fiber cable Hand-held type stripper World’s fastest heating time of 4sec Long lasting battery: Approximately. 500 times with a full charged battery by simple operation.
Specifications
Fiber Material:
Silica glass
Coating Material:
UV cured resin
Coating Thickness:
"Single fiber: 0.25~0.4mm 2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter:
125μm
Coating Removal Length:
max 30mm
Heating Mode:
Normal mode / Power save mode
Temperature Settings:
Normal mode: approx. 80℃, 95℃, 110℃, 130℃
Power save mode:
approx. 70℃, 80℃, 95℃, 110℃
Fiber Holder Type:
FH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900, FH-U (Universal Holder both for 250μm and 900μm)
Power Supply Method:
1) AC drive: AC100~240V, 50/60Hz, 2) DIN port: DC 12V power supplied from fusion splicer
Operating Condition:
Temperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber Type:
Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable, Ribbon fiber: 2 to 12 ribbon fiber cable
Heating Time:
Approx. 4~5sec at normal mode Approx. 5~6sec at save mode
Battery Capacity:
Approx. 500 stripping with 12 ribbon fiber with a full charged battery