Free Ship! 4Axis Nema34 Stepper Motor Single Shaft1600oz.in&Driver DM860A CNCkit

Description

Only Free ship to US buyer!
This item includes:
1. 4 pcs Nema 34 stepper motor 1600 oz.in bipolar with single Shaft
2. 4 pcs Stepper motor driver, DM860A, peak 7.8A ,256 Micsteps,replacing M860
3. 4pcs  Power Supply  350W-60VDC
4. 1 pc  Breakout Board & 1 pc parallel cable
More quatities, More discounts!!
Detailed information :
1. Nema 34 stepper motor:
Technical Specifications
Part No.:                         34HS5435C-37B2
Frame Size:                     NEMA34
Phase:                 2 Phase
Step Angle:                    1.8 degree
Current:                        3.5A
Rated Voltage:         5.6V
Resistance:                   1.6 Ohm/phase
Inductance:                   22mH/phase
Holding torque:           1600oz-in     (10.5N.m)
Detent torque:                  24.5N.cm
Rotor inertia:                3600g.cm²
Number of wire leads:   4 (Red A+ ,Green A- ,Yellow B+ ,Blue B-)
Weight:                               5kg
Length:                                151mm
Front shaft length               37mm
The diameter for motor shaft is 14mm
2.Stepper motor driver--DM860A:
1. Stepper motor driver DM860A:
Introduction:
DM860A  is a type  of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
l         High performance, low price
l         Average current control, 2-phase sinusoidal output current drive
l         Supply voltage from 24VDC to 80VDC
l         Opto-isolated signal I/O
l         Overvoltage, under voltage, overcorrect, phase short circuit protection
l         14 channels subdivision and automatic idle-current reduction
l         8 channels output phase current setting
l         Offline command input terminal
l         Motor torque is related with speed, but not related with step/revolution
l         High start speed
l         High hording torque under high speed
3. Power Supply:
The power is 350W, the output voltage is 60VDC/5.83A
4. Breakout Board:
Output pin: P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
P2 – X axis Pulse, P3 – X axis Direction
P4 – Y axis Pulse, P5 - Y axis Direction
P6 – Z axis Pulse, P7 – Z axis Direction
P8 - A axis Pulse, P9 - A axis Direction
P14 - B axis Pulse, P1- B axis Direction
P16 - C axis Pulse, P17- C axis Direction
Input pin: P10 ,P11, P12, P13, P15
Set them for Emergency Stop and X Y Z Limit switch
It can also be set to the spindle control signal \ electrical permit
Description:
Built in DB25 male connector.
DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
DB25 Input Pin: P10,P11,P12,P13,P15.
DB25 GND Pin: P18-P25.
Power supply: +5V DC.
Built in C-class Optical-coupler.
High quality with Surface-mount Tech.
Application:Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters. Carver machine ,Dispenser,Automazation,3D Printer,Stage lighting,instrument,laser equipment,scanner and so on.These motors have been used in precision telescope positioning systems and robots.