-40%

For 6-Fiber 50/125 OM4 Ultra-Fox In/Outdoor Distribution, Riser Rated

$ 369.6

Availability: 100 in stock
  • Brand: Unbranded
  • Condition: open box condition
  • All returns accepted: ReturnsNotAccepted

    Description

    For 6-Fiber 50/125 OM4 Ultra-Fox In/Outdoor Distribution, Riser Rated
    Bulk Fiber, 6 Strand, Multimode, 50/125 10GB, OM4, Distribution Cable, OFNP Plenum Rated, Indoor/Outdoor, Tight Buffer, Aqua Outer Jacket
    This riser distribution fiber cable is ideal for Indoor/outdoor applications. The tight-bound, tight-buffered design allows the fiber cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types. It's ideal for configurations requiring a single termination point with multiple fibers. The riser distribution fiber cable uses high performance components and construction and is UL Listed in accordance with NEC sections 770.179(b) for use in vertical runs in building riser shafts or from floor to floor.
    Multimode Fiber Information
    Multi-Mode cable commonly has a diameter in the 50-to-100 micron range (typical multimode fiber core diameters are 50 or 62.5 micrometers). Multimode fiber gives you high bandwidth at high speeds (10 to 100MBS - Gigabit to 275m to 2km) over medium distances. Light waves are dispersed into numerous paths, or modes, as they travel through the cable's core typically 850 or 1300nm. However, in long cable runs (greater than 3000 feet [914.4 meters), multiple paths of light can cause signal distortion at the receiving end, resulting in an unclear and incomplete data transmission so designers now call for single mode fiber in new applications using Gigabit and beyond.
    Applications:
    Indoor/outdoor tight-bound tight-buffered design allows cables to be installed in intra-building backbone and inter-building campus locations without costly transitions between cable types
    Ideal configuration for a single termination point requiring multiple fibers
    Cost Savings:
    900 micron buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
    No need to splice outdoor cable to indoor cable at building entrance
    High crush resistance may eliminate the need for innerduct
    Features:
    High performance components and construction
    Cable materials are indoor/outdoor - UL-listed OFNR and UV, water and fungus resistant
    UL Listed in accordance with NEC section 770.179(b) for use in vertical runs in building riser shafts or from floor to floor
    Wide operating temperature range of -40°C to +85°C
    Helically stranded core for greater flexibility and mechanical protection of the optical fibers
    High strength-to-weight ratio
    2-144 fiber configuration is smaller and lighter than comparable sub-grouped cables made by others: ideal for installation in areas with limited space or tight bends
    Can be armored for additional protection in direct burial and aerial installations
    Interlocking armor can be applied to cables as an alternative to conduit installation
    Returns
    If you'd like to return your item there is 20% restocking fee. Due to inconvenience. Thank you
    Shipping
    All items will be shipped same business day via UPS, or the next business day if we have already left for the day.
    Quality
    All items we sell have been returned by customers.  We do our best to note any defects or damage to the items, and provide pictures.  Many items we are selling have never even been opened before we list them, and were only opened so we can verify they are not damaged, and take photos.
    Our Prices
    We are very aware our prices are better than anything else you will find on eBay or anywhere else for that matter.  We have been selling returned items for a few years locally, and are just getting started on eBay, so our prices at this time are very low on purpose.  We realize you as a buyer may be suspicious of such low prices, we we assure you we have all items and will ship promptly.  If you are interested in an item we have, we strongly suggest you buy it, as in the near future, our prices will most definitely go up.  We will always have the best prices out there, but for the time being, we simply want to get products in your hands so you can see the quality of what we are offering.
    Support
    Please feel free to message us with any questions, or requests for more photos.  We will respond as soon as possible.