CNC Kit 5 Axis With Nema14 62oz-in Stepper Motor & EMA2-040D22 Stepper Driver

Description

CNC Kit 5 Axis With Nema14 62oz-in Stepper Motor & EMA2-040D22 Stepper Driver
Only
USD
+P&P USD
*
/12
Description
ENGMATE
™
5 Axis Kit for CNC DIY
1*5 Axis Breakout Board + 5*EMA2-040D22 Microstep Motor Drivers + 5*EMA142-4520S4 Nema14 62oz-in Stepper Motors + 1*24V 15A Switching Power Supply
The upgraded 5 axis breakout board is specially designed for the CNC single axis 2-phase stepper driver controller. The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger. With this 5 axis breakout board, any 1-5 Microstepper driver controllers can be directly controlled by the PC via the MACH3, KCAM4, etc. parallel-control CNC software.
Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board.
The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
In short, you will get more benefits from the Kit on CNC work, especially extra-low motor noise offers excellent quietness. Please purchase this kit with confidence.
Why Purchase CNC Products in our store?
10+ Years Rich Experience
High Quality Product
Professional After-Sale Service
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have.
Stepper motors and drivers from ENGMATE
™
are with high quality for stable and durable usage.
The professional technical support and excellent after-sales service are backed up by a loyal and experienced team.
5 Axis
Breakout Board
• High performance, cost-effective
• Maximum support
5-axis stepper motor driver controllers
• Compatible with MACH3 etc. parallel-control CNC software
• USB power supply and peripherals powered phase are separated to protect computer security
•
All the signals are opto-isolated
which can protect your computer security
•
5-input interface
to define the Limit, Emergence-Stop, Cutter alignment etc
• Wide input voltage range: 12-24V, and with anti-reverse function
•
One relay output control interface
, accessed by the spindle motor or the air pump, water pump, etc
• Compatible with all the
2 phase
microstep drivers in the market
•
Output 0-10V analog voltage
for inverter to control the spindle speed
• Shape Pulse and direction signals. Data transfer speeds of up to 10MBit/S
• Amplification, filtering, enhancement processing drivers enable signal
Digital Hybrid Microstepping Driver
(EMA2-040D22)
•
Extra-low motor noise offers excellent quietness
• Supply voltage from
20-40V DC
• Output current programmable,
with 7 stalls output current setting
, from
0.5A-2.2A (Peak)
• Adoption of 32-bit DSP, pure sine wave subdivision technology
• Low-vibration and low temperature rising.
• Microstep resolutions programmable,
with 3 stalls microstep subdivision setting
• Automatic half-current reduction as long as switching off SW4 when motors stop
• Internal optical isolation, pulse input frequency up to
200KHz
• Support
PUL/DIR mode
• Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
• Suitable for 2-phase and 4-phase Hybrid stepper motors
Hybrid Stepper Motor
(EMA142-4520S4)
• High torque, more smooth movement
• High efficiency, energy-saving, low noise and low vibration
• High start torque, low start current and reliable performance
• Simple 4 wires ensure easier wiring, installation and maintenance
24V 15A
Switching Power Supply
• High efficiency, high reliability, low cost
• Adjustable
±10%
Output Voltage support
• PWM control and regulation, insure the steady and precise output voltage
• Over-temperature protection: built-in a powerful fan for cooling.
RTH3≥45°C, fan on. RTH3≥85°C, output shutdown
• Built-in EMI filter
• 100% full load burn-in test
• Over current, over voltage, short circuit
• Low output ripple and yawp
Common-anode Connection
Applications
Suitable for a variety of small sized automation equipment and instruments.
• For any small-and-medium automatic equipment with CNC controller, such as engraving machine, plasma cutting machine, milling machine, foam cutting machine, lathes, laser cutting machine etc...
• For other industrial application, such as 3D printer, medical instruments, stage light equipment, robot, music fountain etc...
Matching Stepper Motors
Model NO.
Min Motor Size
Max Motor Size
Recommended Supply Voltage
Recommended ENGMATE Stepper Motors
EMA2-040D15
NEMA 8
NEMA 17
24V DC
EMA112-4506S4, EMA162-3805S4
EMA2-040D22
NEMA 8
NEMA 17
24V DC
EMA082-4208S4, EMA142-4520S4
EMA2-050D42
NEMA 17
NEMA 23
24V/36V DC
EMA172-6015S4, EMA232-5615S4
EMA2-050D56
NEMA 23
NEMA 34
36V DC
EMA232-7630S4, EMA232-11235S4
EMA2-070D56
NEMA 23
NEMA 34
48V DC
EMA242-8840S4, EMA342-7842S4
EMA2-080D72
NEMA 23
NEMA 34
60V DC
EMA342-10050S4, EMA342-15662S4
EMA2-080A72
NEMA 34
NEMA 42
80V DC
EMA422-15065S4
EMA2-220A80
NEMA 34
NEMA 52
110V/220V AC
EMA422-20180S4
Specifications
Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C)
Input Voltage
Get power from PC via USB port and 12-24V power supply for limit/Estop switch
Drive Type
Pulse and Direction Signal Control(EMA2-040D15/EMA2-040D22)
Suitable Microstep Driver
2 Phase Microstep Driver
Net Weight
Approx 75g
Dimension
90*70*20mm (L*W*H)
EMA2-040D22 Stepper Driver
Model NO.
EMA2-040D22
Input Voltage
20-40V DC
Output Current
0.5A-2.2A (Peak)
Pulse Input Frequency
200KHz
Cooling Method
Natural Cooling or Fan Forced cooling
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0°C~50°C (32°F~122°F)
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20°C~65°C (-4°F~149°F)
Humidity
40%RH-90%RH
Dimension (WxHxD)
86×55×20mm
Weight
130g
Suitable Motor
Nema 8, Nema 11, Nema 14, Nema 16, Nema 17
EMA142-4520S4 Nema14 Stepper Motor
Model NO.
EMA142-4520S4
Motor Type
2-Phase
Step Angle (°)
1.8
Rated Voltage (V)
5
Rated Current (A)
2
Phase Resistance (Ω)
2.5
Phase Inductance (mH)
2.6
Holding Torque (kg.cm/oz-in)
4.5/62
Rotor Inertia (g.cm²)
28
Motor Length (mm/in.)
45/1.77
Frame Size (mm/in.)
35/1.38
Lead No.
4
Shaft
Single
Motor Weight (g)
200
360W 24V 15A Switching Power Supply 110/220V Switchable Temperature Control
Input Voltage Range
110VAC/ 220VAC±20% (selected by switch)
Input Frequency
47~63Hz
Output Voltage
24V
Rated Output Current
15A
Output Voltage Adjustment Range
±10%
Weight
1100g
Content
Estimated Delivery Time
(Subject to Stock Availability)
Country/Region
Standard
(Business Days)
Express
(Business Days)
USA, Canada
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
UK, France, Germany and Other EU Countries
(excluding Italy)
7 - 15
4 - 6
South America, Italy, Other Countries/ Regions
15 - 25
varying
We sell items to most countries of the world. To provide the most satisfying shipping experience, your order may be allocated to and processed in the best-match fulfillment center.
Remarks
• Usually, we dispatch your order within
ONE WORKING DAY
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service