5 Axis CNC Kit Mach3 Professional Control Board & EMA2-070D56 Stepper Drivers

Description

5 Axis CNC Kit Mach3 Professional Control Board & EMA2-070D56 Stepper Drivers
Only
USD
+P&P USD
*
/10
Description
1*5 Axis Professional Breakout Board + 5*EMA2-070D56 Microstep Motor Drivers
Why Purchase CNC Products in our store?
10+ Years Rich Experience
High Quality Product
Professional After-Sale Service
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have.
Stepper motors and drivers from ENGMATE
™
are with high quality for stable and durable usage.
The professional technical support and excellent after-sales service are backed up by a loyal and experienced team.
5 Axis Professional Breakout Board
The breakout board in this kit is professional version, which has been upgraded to an intelligent and industrial-level interface board set
including control pad and display panel
. Compared to standard version, professional version mainly has two more functions. One is the "computer G-code recording function", and the other is the "manual programing function".
• Computer G-code recording function
With the embedded intelligent memory chip, this breakout board can easily record MAXIMUM 4 axis' (X,Y,Z,A axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.) of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer.
• Manual programing function
The upgraded built-in manual control tools (display panel and control panel) not only can be used for manual motor control, but also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you also can easily control the microstep drivers and stepper motors with recorded G-code. This function is widely applied in RBI machine, Conveyor etc.
The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market.
This kit is suitable for driving 2-phase and 4-phase Nema 23, Nema 34 hybrid stepping motors with a 2.1A-5.6A current.
• High performance, cost-effective
• Parallel port communication
•
Automatic G-code recording for motor control
•
Manual G-code programming for motor control without computer
• The 5th axis (B axis) on the breakout board can be used as a
PWM signal output interface
for controlling frequency inverter via software (e.g. Mach3 etc.) to adjust speed of main spindle
• Equipped with the display panel and control pad for
manually control the stepper motor
• Automatically finish Tool-settings on X, Y, Z Axis via the control pad , without the support of the computer
• Display panel can
real-time trail the running path of G-Code
on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis' (X, Y, Z A axis etc.) values on its screen, it is completely synchronous with the values' changing on the FOUR coordinates of Mach
•
2 ways
to get power , 5V DC power supply or USB port to get power from PC directly
• Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market
•
2-stage signal processing
, smooth signal transmission, powerful anti-jamming
•
With Relay output control interface
, available to control the spindle motor, air pump, water pump, etc.
•
5 Types
of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
• Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software , etc.
•
Automatic circuit protections
function when the wirings between the breakout board and microstep drivers are incorrect
Digital Hybrid Microstepping Driver
(EMA2-070D56)
This
ENGMATE
™
digital hybrid stepper driver is a high performance Microstep Motor Driver adopting
32-bit DSP, pure sine wave subdivision technology
. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and provide big torque at higher speed than most of the drivers in the market.
It is suitable for driving 2-phase and 4-phase hybrid stepping motors, the Nema 23, Nema 34 stepper motor with a 2.1A-5.6A current will be suitable.
•
Extra-low motor noise offers excellent quietness
• Supply voltage from
24-70V DC
• Output current programmable,
with 7 stalls output current setting
, from
2.1A-5.6A (Peak)
• Adoption of 32-bit DSP, pure sine wave subdivision technology
• Low-vibration and low temperature rising.
• Microstep resolutions programmable,
with 15 stalls microstep subdivision setting
• Automatic half-current reduction as long as switching off SW4 when motors stop.
• Internal optical isolation, pulse input frequency up to
200KHz
• Support
PUL/DIR mode
• Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
• Suitable for 2-phase and 4-phase Hybrid stepper motors
Common-cathode Connection
Applications
Specifications
Matching Stepper Motors
Model NO.
Min Motor Size
Max Motor Size
Recommended Supply Voltage
Recommended ENGMATE Stepper Motors
EMA2-040D15
NEMA 8
NEMA 17
24V DC
EMA112-4506S4, EMA162-3805S4
EMA2-040D22
NEMA 8
NEMA 17
24V DC
EMA082-4208S4, EMA142-4520S4
EMA2-050D42
NEMA 17
NEMA 23
24V/36V DC
EMA172-6015S4, EMA232-5615S4
EMA2-050D56
NEMA 23
NEMA 34
36V DC
EMA232-7630S4, EMA232-11235S4
EMA2-070D56
NEMA 23
NEMA 34
48V DC
EMA242-8840S4, EMA342-7842S4
EMA2-080D72
NEMA 23
NEMA 34
60V DC
EMA342-10050S4, EMA342-15662S4
EMA2-080A72
NEMA 34
NEMA 42
80V DC
EMA422-15065S4
EMA2-220A80
NEMA 34
NEMA 52
110V/220V AC
EMA422-20180S4
Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C)
Input Voltage
5V DC via power adapter or directly get power from PC via USB port
Version Type
Professional version
Drive Type
Pulse + Direction + Enable Signal Control
Suitable Microstep Driver
2 Phase, 3 Phase, 4 Phase Microstep Driver (EMA2-050D42/ EMA2-070D56/ EMA2-080D72/ EMA2-220A80 etc.)
Net Weight
Approx. 275g
Dimension
110x110x25mm
EMA2-070D56 Stepper Driver
Model NO.
EMA2-070D56
Input Voltage
24-70V DC
Output Current
2.1A-5.6A (Peak)
Pulse Input Frequency
200KHz
Cooling Method
Natural Cooling or Fan Forced cooling
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0°C~50°C (32°F~122°F)
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20°C~65°C (-4°F~149°F)
Humidity
40%RH-90%RH
Dimension (WxHxD)
118×75×32mm
Weight
280g
Suitable Motor
Nema 23, Nema 34
Content
Estimated Delivery Time
(Subject to Stock Availability)
Country/Region
Standard
(Business Days)
Express
(Business Days)
USA, Canada
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
UK, France, Germany and Other EU Countries
(excluding Italy)
7 - 15
4 - 6
South America, Italy, Other Countries/ Regions
15 - 25
varying
We sell items to most countries of the world. To provide the most satisfying shipping experience, your order may be allocated to and processed in the best-match fulfillment center.
Remarks
• Usually, we dispatch your order within
ONE WORKING DAY
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service