4 Axis CNC Control Kit Nema23 Stepper Motor 175 Oz-in + M335 Motor Driver 3.5A

Description

4 Axis CNC Control Kit Nema23 Stepper Motor 175 Oz-in + M335 Motor Driver 3.5A
Only
USD
+P&P USD
*
/6
Description
4 x 3.5A 30VDC M335 Microstep Drivers + 1 x 3G 5-axis Breakout Board
4 x Nema23 1.26Nm/175 Oz-in Stepper Motors + 1 x 24V 15A Switching Power Supply
Description
The latest 3G breakout board has been upgraded to a intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip and upgrading the external manual control tools (control pad and display panel). Compare with 1G breakout board, this new breakout board controls the microstep drivers more smoothly and with lower noise.
With the embedded intelligent memory chip, this professional version 3G 5 Axis breakout board can easily
record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.)
, and then make the stepper motor working without the computer any more. Besides, it has
manual programming function
.
The M335 is a high performance microstepping driver with low price. The M335 adopts single-chip PWM bipolar sinusoidal chopper to ensure low vibration and high efficiency. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema16, Nema17, Nema23 stepper motors with a 0.5A-3.5A current will be suitable.
In short, you will get more benefits from the Kit on CNC work. Please purchase this kit with confidence.
Features
I. 3G 5 Axis Breakout Board
Automatically identify PC and control pad control.
Real-time display 4 axis position
.
Automatically finish Tool-settings
on X, Y, Z Axis via the control pad, without the support of the computer.
Compatible with parallel port communicate CNC software like Mach2, Mach3, LinuxCNC(EMC2), KCAM4 CNC, WinPc Light etc.
Support G-Code recording via PC and manual programming via the control pad
.
Two ways to get power, 5V DC power supply or USB port to get power from PC directly.
Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
One Relay output interface
to control the spindle motor, air pump, water pump, etc..
5 input interfaces for
limits, Estop, Midpoint-Setting, Cutter-presetting/Tool.
II. M335 Stepper Driver
Low cost, Non-creeping phenomenon under low speed. Low noise and non-resonant region.
Supply voltage up to
30V DC
.
Output current up to
3.5A
.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
1, 2, 8, 16 adjustable micro step control for more accurate and smoother motor running.
Automatic idle-current reduction
.
Protection of power reversal.
Application
Suitable for a variety of small sized automation equipment and instruments. Such as engraving machine, marking machine, cutting machine, laser typesetting, plotters, CNC machine tools, handling the devices.
Suitable for a wide range of stepping motors, from NEMA size 16/17/23.
Power Supply Selection
Voltage Selection
12-24V DC power supply for Nema 16/17 stepper motors.
24-30V DC power supply for Nema 23 stepper motors.
(High (≥ 30V) voltage will burn out the chips or stepper motors!!! Please be careful in choosing power supply.)
Current Selection
Output current of the power supply can be calculated by the following formula
Output current = Rated current of your stepper motors x quantity + 2A
If the supply current is too low for the drivers, it will easily burn the drivers.
Please SHUT DOWN the power before you plug or unplug the connectors and adjust the DIP Switches to avoid burning up the board.
M335 DIP-Switch Settings
Microstep Resolution Setting
Microstep resolution
SW1
SW2
1
OFF
OFF
1/2
ON
OFF
1/8
ON
OFF
1/16
ON
ON
Decay Mode Setting
Decay Mode
SW5
SW6
No Decay
OFF
OFF
Slow Decay
ON
OFF
Medium Speed Decay
OFF
ON
Fast Decay
ON
ON
Output Current Setting
SW3
SW4
Full Current
Auto Half Current
Peak Current
RMS
Peak Current
RMS
OFF
OFF
3A
2.14A
1.5A
1.07A
ON
OFF
2.25A
1.6A
0.6A
0.42A
OFF
ON
1.5A
1.07A
1.5A
1.07A
ON
ON
0.6A
0.42A
0.6A
0.42A
Interfaces
Connection Diagrams
(Breakout-Board-Wiring)
(M335-Wiring)
Specifications
Electrical Specifications of Breakout board
Input Voltage
5V DC via power adapter or directly get power from PC via USB port
Version Type
Professional version
Drive type
Pulse + Direction + Enable Signal Control
Suitable Microstep Driver
2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.)
Operationg Environment & Other Specifications of Breakout Board
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 275g (Breakout Board + Control Pad + Display Panel)
Dimensions
110*110*25mm
Electrical Specifications Of M335 Microstepper Driver
Input Voltage
12V ~ 30V(Peak) DC
Output Current
0.5A ~ 3.5A (Peak)
Drive Type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Motor
Nema16, Nema17, Nema23
Isolation Resistance
500MΩ
Operationg Environment & Other Specifications Of M335 Microstepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 125°C (-4°F ~ 257°F)
Total Weight
Approx. 200g
Dimensions
97*75*35mm
Specifications of Switching Power Supply
Input Voltage
100-120VAC and 200-240VAC by Switch
Input frequency
50/60Hz
Output voltage
24V
Total current
15A
Vout adjustable range
24V±10%
Size
210*115*50mm
Weight
1100g
Specifications of Stepper Motor
Model
57BYGH56-401A
Shaft
Single Shaft (Diameter:6.35mm; Length:21mm)
Rated Current
2.8A/Phase
Step angle
1.8°±5%
Phase
2 Phases
Phase resistance
0.9x(1+10%)Ω/Phase
Phase inductance
2.5x(1+20%)mH/Phase
Holding torque
1.26Nm (Approx. 175 Oz-in)
Positioning torque
300gf.cm
Weight
0.7Kg/Piece
Content
Estimated Delivery Time
(Subject to Stock Availability)
USA (excl. Alaska, Hawaii, Puerto Rico)
USPS First-Class Package/ UPS SurePost/ UPS Ground
3-7
business days
Other Countries
(May depart from other stock location)
International Airmail Service
12-21
business days
Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:
• Need the item urgently.
• Require that the item should be delivered within a certain time.
• Have any other questions/requirements about delivery.
Remarks
• Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
• Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
• It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
• Please contact us if you have any trouble in receiving your orders. We will help you to track them.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service