3.3Nm Nema24 Stepper Motor CNC Kit 4 Axis 5A TB6600HG Stepper Driver 36V 10A PS

Description

3.3Nm Nema24 Stepper Motor CNC Kit 4 Axis 5A TB6600HG Stepper Driver 36V 10A PS
Only
USD
+P&P USD
*
/6
Description
4 Pieces 5A 45VDC TB6600HG Microstep Drivers + 3G 5 Axis Breakout Board(Professional Ver)
4 Pieces Nema24 3.3Nm/467 Oz-in Stepper Motors + 2 Pieces 36V10A Switching Power Supply
Description
The latest 3G breakout board has been upgraded to the intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip and upgrading the external manual control tools (control pad and display panel). The breakout board controls the microstep drivers more smoothly and with lower noise.
With the embedded intelligent memory chip, this professional version 3G 5 Axis breakout board can easily
record MAXIMUM 4 Axis' (X, Y, Z, A Axis) G-code running on the CNC software (e.g. Mach3, EMC2, KCAM4, etc.),
and then make the stepper motor working without the computer any more. Besides, it has
manual programming function
.
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Moreover, the brand new design with BiCD0.13 (45V) process technology on the chipset also ensures maximum 5.0A output current and 45V output withstand voltage. Consequently, as long as the current range of the stepper motor is within
0.2-5 amps, all the 2 Phase or 4 Phase of Nema17, Nema23, Nema24 stepper motors
will work perfectly with this new-type TB6600HG Stepper Driver.
Features
I. 3G 5 Axis Breakout Board
High performance, cost-effective.
Automatically identify PC and control pad control.
Real-time display 4 axis position.
Automatically finish Tool-settings
on X, Y, Z Axis via the control pad, without the support of the computer.
Compatible with parallel port communicate CNC software like Mach2, Mach3, LinuxCNC(EMC2), KCAM4 CNC etc.
Support G-Code recording via PC and manual programming via the control pad.
Two ways to get power, 5V DC power supply or USB port to get power from PC directly.
Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
One Relay output interface
to control the spindle motor, air pump, water pump, etc...
5-axis work LED display, visually display the working condition of the stepper driver controller.
5 input interfaces to set
Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool.
II. TB6600HG Stepper Driver Board Controller
High performance, cost-effective.
Automatic idle-current reduction
.
Supply voltage up to
45V DC
.
Output current up to
5.0A
.
Suitable for 2-phase and 4-phase motors.
High speed optoelectronic isolation signal input.
Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
1, 2, 4 (New Mode), 8, 16 adjustable microstep control, motors run more precisely and smoothly.
Cooling Aluminium Box Design for Cooling, and protect the driver board from being damaged by dirt, dust or other liquids.
Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
III. Stepper Motor 60BYGH100-401A
Application
Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices.
For advising, such as brand, architechture mould, badge, nameplate, display boards, doorplate, furniture decoration, etc...
For processing various pattern mould.
This kit is suitable for below typical CNC machines.
TB6600HG DIP-Switch Settings
I. DIP-Switch Instructions
II. DIP-Switch Settings Diagram
Output Current
SW1
SW2
SW3
0.2A
ON
ON
ON
0.6A
OFF
ON
ON
1.2A
ON
OFF
ON
1.8A
OFF
OFF
ON
2.5A
ON
ON
OFF
3.3A
OFF
ON
OFF
4.2A
ON
OFF
OFF
5.0A
OFF
OFF
OFF
Microstep Mode
SW4
SW5
SW6
N/A
ON
ON
ON
1(Full Step)
OFF
ON
ON
2
ON
OFF
ON
2
OFF
OFF
ON
4
ON
ON
OFF
8
OFF
ON
OFF
16
ON
OFF
OFF
N/A
OFF
OFF
OFF
Interface Instructions
(3G 5 Axis Breakout Board)
(TB6600HG Stepper Driver)
Connection Diagrams
(Breakout-Board-Wiring)
(TB6600HG-Wiring)
Specifications
Electrical Specifications of Breakout board
Input Voltage
5V DC via power adapter or directly get power from PC via USB port
Version Type
Professional version
Drive type
Pulse + Direction + Enable Signal Control
Suitable Microstep Driver
2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.)
Operationg Environment & Other Specifications of Breakout Board
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 275g (Breakout Board + Control Pad + Display Panel)
Dimensions
110*110*25mm
Electrical Specifications of TB6600HG Stepper Driver
Input Voltage
12V ~ 45V(Peak) DC
Output Current
0.2A ~ 5.0A (Peak)
Drive type
Pulse + Direction + Enable Signal Control (Single-Chip PWM Bipolar Sine Chopper)
Suitable Microstep Driver
Nema17, Nema23, Nema24(Rated current: 0.2A-5.0A)
Operationg Environment & Other Specifications Of TB6600HG Stepper Driver
Cooling
Natural Cooling or Fan Forced cooling
Operating Environment
Environment
Avoid dust, oil fog, corrosive gas
Ambient Temperature
0 °C ~ 50°C (32°F ~ 122°F)
Humidity
40%RH ~ 90%RH
Operating Temperature
70°C (158°F) Max
Storage Temperature
-20 °C ~ 65°C (-4°F ~ 149°F)
Total Weight
Approx. 300g
Dimensions
105*85*35mm
Specifications Of Switching Power Supply
Input Voltage
90-132VAC/180-264VAC by switch
Input frequency
47~63Hz
Output voltage
36V
Total current
10A
Voltage adjustable range
36V±10%
Size
215*115*50mm
Weight
1100g
Specifications of Stepper Motor
Model
60BYGH100-401A
Shaft
Single Shaft (Diameter:8mm; Length:24mm)
Rated Current
4.2A/Phase
Rated Voltage
3.36V
Step angle
1.8°±5%
Phase
2 Phases
Phase resistance
0.8x(1+10%)Ω/Phase
Phase inductance
4.0x(1+20%)mH/Phase
Holding torque
3.3Nm (Approx. 467 Oz-in)
Insulation class
Class B
Positioning torque
800gf.cm
Insulation resistance
≥100MΩ (500VDC)
Weight
2Kg/Piece
Content
Estimated Delivery Time
(Subject to Stock Availability)
Country/Region
Standard
(Business Days)
Express
(Business Days)
USA, Canada
5 - 10
3 - 5
Australia, New Zealand, South Asia, East Asia
7 - 12
3 - 5
UK, France, Germany and Other EU Countries
(excluding Italy)
7 - 15
4 - 6
South America, Italy, Other Countries/ Regions
15 - 25
varying
We sell items to most countries of the world. To provide the most satisfying shipping experience, your order may be allocated to and processed in the best-match fulfillment center.
Remarks
• Usually, we dispatch your order within
ONE WORKING DAY
upon receipt of full payment when stock lasts.
• Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
•
For fixed-time delivery or any special needs
, please do contact and confirm with us BEFORE placing order.
Safe and Easy Payment
PayPal
• We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with
NO surcharge
)
• If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.
Remarks
• Payment is required
within 5 days
after auction ends.
• All sales are final. Shipping and handling charges are not negotiable.
• Your
PayPal shipping address will be used for delivery BY DEFAULT
unless otherwise informed.
• Please double-check to make sure your PayPal shipping address is correct before making payment.
Satisfaction Guaranteed
30 Days Money Back Guarantee
If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message)
within 30 days
of receipt of goods for return & refund guidance.
Free Replacement
If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.
12 Months Supplier Warranty
We provide
ONE YEAR warranty
on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.
Requirements
• All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.
Agreement
: By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions.
Image Gallery
Description
Specification
What's In
Service